FixVault
Home › Chevrolet › 2012 › Chevy Express H1500, Van Cargo › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 4.8L, 5.3L, 6.0L - Repair Instructions › Repair Instructions › Fuel Pump Flow Control Module Replacement › Removal Procedure

Removal Procedure

  1. Fig 1: View Of Chassis Wiring Harness Electrical Connector & Fuel Pump Flow Control Module
    GM1931044Courtesy of GENERAL MOTORS COMPANY

    Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the chassis wiring harness electrical connector (2) from the fuel pump flow control module (1).
    3. Fig 2: View Of Fuel Pump Flow Control Module & Bolts
    GM1931045Courtesy of GENERAL MOTORS COMPANY
  3. Remove the fuel pump flow control module bolts (1).
  4. Remove the fuel pump flow control module (2) from the frame.
About FixVault