FixVault
Home › Chevrolet › 2012 › Corvette Base, 2D Convertible, Automatic Trans › Repair and Diagnosis (Single Page) › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Fan Control Module Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Cooling Fan Control Module Electrical Connector
    GM1500599Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the cooling fan control module electrical connector.
    3. Fig 2: View Of Cooling Fan Control Module
    GM1500602Courtesy of GENERAL MOTORS COMPANY
  3. Remove the cooling fan control module retaining bolt.
  4. Remove the cooling fan control module from the vehicle.
About FixVault