FixVault
Home › Chevrolet › 2012 › Corvette Base, 2D Convertible, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › DTC C0179 › Circuit/System Testing

Circuit/System Testing

IMPORTANT:

Allow brakes to cool down before performing test.

  1. With scan tool clear the DTC.
  2. Refer to Diagnostic Aids.
  3. With scan tool connected test drive the vehicle under normal braking conditions and without causing TCS or ABS activation. Verify DTC C0179 does not reset.
    • If the DTC resets, replace the EBCM.
About FixVault