FixVault
Home › Chevrolet › 2012 › Corvette Base, 2D Convertible, Automatic Trans › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment System › Repair Instructions › Rear Camber Adjustment › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Control Arm & Stabilizer Shaft Link
    GM922511Courtesy of GENERAL MOTORS COMPANY
  3. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the lower control arms.
  4. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts and links from the shaft.
About FixVault