FixVault

Communication Interface Module Replacement

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Communication Interface Module
GM2348937Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the communication interface module bracket. Refer to Communication Interface Module Bracket Replacement .
1 Communication Interface Module

Procedure

  1. Disconnect the electrical connections.
  2. If replacing the communication interface module be sure to transfer Bluetooth antenna, if equipped.
  3. For programming and set up procedures, refer to Control Module References .