FixVault
Home › Chevrolet › 2012 › Cruze LS, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 254 (Object Detection System - Park Assist System) › Repair Instructions › Rear Object Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
About FixVault