FixVault
Home › Chevrolet › 2012 › Cruze LS, Automatic Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Engine Controls/Fuel - 1.4L - Repair Instructions) › Repair Instructions › Fuel Pump Flow Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the rear lid.
  2. Remove the rear compartment side trim - right side. Refer to Rear Compartment Side Trim Replacement - Right Side .
    3. Fig 1: Fuel Pump Flow Control Module
    GM2373079Courtesy of GENERAL MOTORS COMPANY
  3. Remove the fuel pump flow control module wiring harness plug (2) from the fuel pump flow control module (1).
    4. Fig 2: Fuel Pump Flow Control Module
    GM2373080Courtesy of GENERAL MOTORS COMPANY
  4. Unclip the fuel pump flow control module bracket clip (1) from the fuel pump flow control module (3).
  5. Unclip the 2 fuel pump flow control module clips (4) from the fuel pump flow control module bracket (2).
About FixVault