FixVault
Home › Chevrolet › 2012 › Cruze LTZ › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 1.4L - Repair Instructions › Repair Instructions › Ignition Coil Replacement › Removal Procedure

Removal Procedure

  1. Remove engine sight shield.
    2. Fig 1: Ignition Coil And Ignition Coil Wiring Harness Plug
    GM2191363Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect ignition coil wiring harness plug (2) from ignition coil (1).
    3. Fig 2: Ignition Coil Bolts
    GM2191364Courtesy of GENERAL MOTORS COMPANY
  3. Remove the 2 ignition coil bolts (1).
    4. Fig 3: Ignition Coil And Special Tool
    GM2191365Courtesy of GENERAL MOTORS COMPANY
  4. Install EN-6009  remover/installer (1) to ignition coil (2).
  5. Remove the ignition coil.
About FixVault