FixVault
Home › Chevrolet › 2012 › Malibu LS, 2.4L Eng VIN 1 › Repair and Diagnosis › Transmission › Automatic Trans › Shift Lock Control System › Repair Instructions › Automatic Transmission Shift Lock Control Actuator Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Shift Lock Control Solenoid
    GM1285269Courtesy of GENERAL MOTORS COMPANY
  1. Route the shift lock control solenoid through the opening in the front of the control assembly.
    2. Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body
    GM1285268Courtesy of GENERAL MOTORS COMPANY
  2. Attach the ball-sockets to the control assembly body and the shift-lock control lever.
    3. Fig 3: Disconnecting Shift Lock Control Solenoid Connector From Solenoid
    GM1285267Courtesy of GENERAL MOTORS COMPANY
  3. Connect the electrical connector to the Shift Lock Control Solenoid.
  4. Install the automatic transaxle control assembly. Refer to Transmission Control Replacement , for the MH8 transmission or Transmission Control Replacement for the MH2 transmission.
About FixVault