Component Testing

Static Test

1. Ignition OFF, disconnect the harness connector at the S75 Traction Control Switch.
2. Test for infinite resistance between the signal circuit terminal 2 and the ground circuit terminal 4 with the switch in the released position.
   • If less than infinite resistance 

     Replace the S75 Traction Control Switch.

   • If infinite resistance 
3. Test for less than 5 Ω between the signal circuit terminal 2 and the ground circuit terminal 4 with the switch in the pressed position.
   • If greater than 5 Ω 

     Replace the S75 Traction Control Switch.

   • If less than 5 Ω 
4. All OK.