FixVault
Home › Chevrolet › 2012 › Orlando LT, Automatic Trans › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Replacement (1.8L 2H0) › Installation Procedure

Installation Procedure

    Fig 1: Generator Bolts
    GM2027790Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator (1).
    2. CAUTION:

    Refer to Fastener Caution.

  2. Install the 2 generator bolts (2) and tighten to 35 N.m (26 lb ft).
    3. Fig 2: Generator Wiring Harness
    GM2512581Courtesy of GENERAL MOTORS COMPANY
  3. Install the 2 generator wiring harness (2, 3) to the generator (1).
  4. Install the generator wiring harness nut (4) and tighten to 20 N.m (15 lb ft).
  5. Install the generator and air conditioning compressor belt. Refer to DRIVE BELT REPLACEMENT.
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without Start/Stop System) .
  7. Install the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
  8. Close the hood.
About FixVault