FixVault
Home › Chevrolet › 2012 › Tahoe SSV › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Hybrid/EV Control System) › Diagnostic Information and Procedures › DTC P2797 › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Inspect for DTC P0C2B. Diagnose DTC P0C2B before performing this procedure.
  2. Transmission Fluid Level and Condition Check .
  3. With vehicle in Autostop, observe the aux. trans. fluid pump actual, aux. trans. fluid pump commanded, and fault status displays with the scan tool. If a fault status is observed, refer to Circuit/System Testing.
About FixVault