FixVault
Home › Chevrolet › 2012 › Traverse LS, AWD › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls/Fuel - 3.6L - Repair Instructions › Repair Instructions › Mass Airflow Sensor with Intake Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAF/IAT Sensor Screws
    GM2667675Courtesy of GENERAL MOTORS COMPANY
  1. Install the MAF/IAT sensor (2) to the air cleaner assembly.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the MAF/IAT sensor screws (1).

    Tighten 

    Tighten the screws to 4 N.m (35 lb in).

  3. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
About FixVault