FixVault
Home › Chevrolet › 2012 › Traverse LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 166 (Power Steering System) › Diagnostic Information and Procedures › DTC C0450 › Component Testing

Component Testing

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Test for 5-10 ohms between the control terminals 1 and 2.
    • If not within the specified range, replace the VES actuator.
  3. Test for infinite resistance between each terminal and the VES actuator housing/case.
    • If not the specified value, replace the VES actuator.
About FixVault