Power Steering Pump Pulley Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Steering Pump Pulley

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the power steering pump. Refer to Power Steering Pump Replacement .
1	Power Steering Pump Pulley Procedure Use the J 25034-C remover for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to remove the power steering pump pulley. Use the J 25033-C installer for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to install the power steering pump pulley. Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in). Special Tools J 25033-C Pulley Installer J 25034-C Pulley Remover SA9162C Power Steering Pump Pulley Remover/Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Remove the power steering pump. Refer to Power Steering Pump Replacement .

Power Steering Pump Pulley

Procedure

Use the J 25034-C remover for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to remove the power steering pump pulley.
Use the J 25033-C installer for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to install the power steering pump pulley.
Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).

Special Tools

J 25033-C Pulley Installer
J 25034-C Pulley Remover
SA9162C Power Steering Pump Pulley Remover/Installer

For equivalent regional tools, refer to Special Tools .