FixVault
Home › Chevrolet › 2012 › Traverse LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 406 (Power Seat System) › Diagnostic Information and Procedures › Memory Seat Feature Inoperative › Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Memory Switch

  1. Disconnect the harness connector at the memory seat adjuster switch.
  2. Test for infinite resistance between the signal terminal 1 and the 12 V reference terminal 2.
    • If not the specified value, replace the memory seat adjuster switch.
  3. Test the resistance between terminal 1 and terminal 2 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
    • If the resistance is not within the specified range, replace the memory seat adjuster switch.
Memory Switch Values

Switch Position Resistance
Idle Infinite
Memory 1 2.03K-2.49K Ω
Memory 2 3.83K-4.69K Ω
EXIT 8.33K-10.18K Ω
About FixVault