FixVault
Home › Chevrolet › 2012 › Volt › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Brake Control Brake Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the brake control brake pedal position sensor electrical connector.
    2. Fig 1: Brake Control Brake Pedal Position Sensor Bolt
    GM2634918Courtesy of GENERAL MOTORS COMPANY
  2. Remove the brake control brake pedal position sensor bolt (1).
    3. Fig 2: Brake Control Brake Pedal Position Sensor
    GM2634921Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake control brake pedal position sensor (1).
About FixVault