Communication Interface Module Bracket Service Positioning

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to disconnect the electrical wiring to the modules or remove the modules from the communications interface module bracket when following the service positioning procedure.

Fig 1: Positioning Communication Interface Module Bracket Service

Courtesy of GENERAL MOTORS CORP.

Communication Interface Module Bracket Service Positioning

Callout	Component Name
1	Communication Interface Module Bracket Fasteners (Qty: 4)
2	Communication Interface Module Bracket Assembly Procedure: Position the communication interface module bracket assembly out of the way.