Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Control Arm Bushing Bolt (1) | ||
|
55 N.m | 41 lb ft |
|
plus 100 degrees | |
| Front Lower Control Arm Rear Mount Bolts (1) | ||
|
70 N.m | 52 lb ft |
|
plus 85 degrees | |
| Front Lower Control Arm Bolt at the Frame (1) | ||
|
70 N.m | 52 lb ft |
|
plus 80 degrees | |
| Front Stabilizer Shaft Link Nuts (2) | 65 N.m | 48 lb ft |
| Front Stabilizer Shaft Insulator Bolts (1) | ||
|
22 N.m | 16 lb ft |
|
plus 40 degrees | |
| Front Strut Nuts (at the knuckle) (2) | ||
|
85 N.m | 63 lb ft |
|
plus 65 degrees | |
| Front Strut Nut (at the upper mount) | 70 N.m | 52 lb ft |
| Front Strut Shaft Nut | 45 N.m | 33 lb ft |
| Front Wheel Bearing and Hub Bolts | ||
|
100 N.m | 74 lb ft |
|
plus 60 degrees | |
| Lower Control Arm Ball Joint Nut (1) | ||
|
50 N.m | 37 lb ft |
|
loosen 120 degrees | |
|
50 N.m | 37 lb ft |
|
plus 35 degrees | |
|
||