FixVault
Home › Chevrolet › 2012 › Volt › Repair and Diagnosis › External Pages › Different car › Section 54 (Keyless Entry System And Remote Functions) › Diagnostic Information and Procedures › DTC B097B › Component Testing

Component Testing

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S38 ignition mode switch.
  2. With the button released, test for 4.5-5.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.
  3. With the button pressed, test for 1-1.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.
About FixVault