Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| 300 - Volt Battery Positive and Negative Cable Bracket Nut (Drive Motor Battery-to-APM Module) - APM Side | 8 N.m | 71 lb in |
| 300 - Volt Battery Positive and Negative Cable Retainer Nut (Drive Motor Battery-to-APM Module) - Battery Front Side | 8 N.m | 71 lb in |
| 300 - Volt Battery Positive and Negative Cable to Chassis Frame Nuts (Drive Motor Battery-to-Charger) | 8 N.m | 71 lb in |
| 300 - Volt Battery Positive and Negative Cable Bolt (Drive Motor Battery-to-Inverter) - Battery Side | 8 N.m | 71 lb in |
| 300 - Volt Battery Positive and Negative Cable Bolt (Drive Motor Battery-to-Inverter) - Inverter Side | 9 N.m | 80 lb in |
| 300 - Volt Battery Positive and Negative Cable Bolt (Inverter-to-Compressor/Heater Module) - Inverter Side | 9 N.m | 80 lb in |
| Drive Motor Battery Coolant Outlet Hose Clamp Nut | 9 N.m | 80 lb in |
| Drive Motor Battery Ground Cable Buts | 9 N.m | 80 lb in |
| Drive Motor Battery Tray Bolts (Side and Rear Tray) | 58 N.m | 43 lb ft |
| Drive Motor Battery Tray Bolts (Front Tray) | 22 N.m | 16 lb ft |
| Floor Panel Bar Nuts | 22 N.m | 16 lb ft |
| Floor Panel Bar Bolts | 58 N.m | 43 lb ft |
| Fuel Tank Strap Bolts | 20 N.m | 15 lb ft |