FixVault
Home › Chevrolet › 2013 › Camaro LS, Automatic Trans › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Diagnostic Information and Procedures › DTC B274A › Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the S148E Multifunction Switch-Center Console.
  2. Test for infinite resistance between the signal terminal 6 and the ground terminal 2 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S148E Multifunction Switch-Center Console.

    • If infinite resistance 
  3. All OK.
About FixVault