Installation Procedure

Fig 1: Identifying CKP Sensor To Engine Block Retaining Bolt

GM1949785

Courtesy of GENERAL MOTORS COMPANY

Install the CKP sensor (2) to the engine block.

CAUTION:

Refer to Fastener Caution .

Install the CKP sensor to engine block retaining bolt (1) and tighten to 10 (89 lb in).

Fig 2: Identifying CKP Electrical Connector

GM1949783

Courtesy of GENERAL MOTORS COMPANY

Connect the CKP electrical connector (3) to the CKP sensor.
Lower the vehicle.
Perform the crankshaft position sensor learn procedure. Refer to Control Module References .