Rear Side Door Window Regulator Replacement

Fig 1: Identifying Rear Door Window Regulator Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear side door window from the regulator guide bolts. Do Not remove the window from the vehicle, raise the window to the fully up position, tape in place. Refer to Rear Side Door Window Replacement .
1	Rear Side Door Window Regulator to Guide Bolts (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Remove the rear side door water deflector. Disconnect the electrical connector from the window regulator motor. Tighten 5 N.m (44 lb in)
2	Rear Side Door Window Regulator Bolt (Qty: 6) Tighten 10 N.m (89 lb in)
3	Rear Side Door Window Regulator