Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brake Rotor
Rotor Discard Thickness*	28.6 mm	1.126 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	29.0 mm	1.142 in
Rotor Thickness- New	30 mm	1.181 in
Rear Brake Rotor
Rotor Discard Thickness*	12.5 mm	0.492 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	13.0 mm	0.512 in
Rotor Thickness- New	14.0 mm	0.551 in
*All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.