FixVault

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Power Mirror Switch
    GM1350444Courtesy of GENERAL MOTORS CORP.
  1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
  2. Disconnect the electrical connector from the switch.
  3. Using a small flat-bladed tool, carefully release the power mirror switch retainers and remove the switch.
  4. Remove the switch from the vehicle.