FixVault
Home › Chevrolet › 2013 › Malibu LS › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C0565 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C0565 is not set.
    • If the DTC C0565 is set 
    1. Program the K43 Power Steering Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets,

        replace the K43 Power Steering Control Module.

      • If the DTC does not set
    3. All OK.
    • If the DTC C0565 is not set 
  3. All OK.
About FixVault