Sunroof Module Assembly Replacement

WARNING: This page is about a different car, the 2014 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunroof Module Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the sunroof window. Refer to Sunroof Window Replacement . Remove the headliner. Refer to Headlining Trim Panel Replacement (Sedan with Sunroof) , Headlining Trim Panel Replacement (Hatchback with Sunroof) , Headlining Trim Panel Replacement (Hatchback without Sunroof) , Headlining Trim Panel Replacement (Sedan without Sunroof) . Disconnect the front and rear sunroof drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement .
1	Sunroof Module Bolts (Qty :9) CAUTION: Refer to Fastener Caution . Procedure With an assistant, lower and remove the sunroof module assembly from the vehicle. Place the sunroof assembly on a clean dry surface. Transfer all necessary components to the new module assembly. Tighten 9 N.m (80 lb in)
2	Sunroof Module Procedure Secure the harness to the sunroof module. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment . Verify the proper operation of the sunroof before securing the headliner. Ensure the motor/actuator initialization/teach process has been done. Refer to Sunroof Motor/Actuator Initialization/Teach Process .

Callout

Component Name

Preliminary Procedures

Remove the sunroof window. Refer to Sunroof Window Replacement .
Remove the headliner. Refer to Headlining Trim Panel Replacement (Sedan with Sunroof) , Headlining Trim Panel Replacement (Hatchback with Sunroof) , Headlining Trim Panel Replacement (Hatchback without Sunroof) , Headlining Trim Panel Replacement (Sedan without Sunroof) .
Disconnect the front and rear sunroof drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement .

Sunroof Module Bolts (Qty :9)

CAUTION: Refer to Fastener Caution .

Procedure

With an assistant, lower and remove the sunroof module assembly from the vehicle.
Place the sunroof assembly on a clean dry surface.
Transfer all necessary components to the new module assembly.

Tighten
9 N.m (80 lb in)

Sunroof Module

Procedure

Secure the harness to the sunroof module.
Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
Verify the proper operation of the sunroof before securing the headliner.
Ensure the motor/actuator initialization/teach process has been done. Refer to Sunroof Motor/Actuator Initialization/Teach Process .