Circuit/System Verification

NOTE:

Since most occurrences of this DTC are caused by excessive driver inputs, review the conditions under which the DTC sets with the customer.

Verify the DTC sets outside the conditions for running and setting the DTC.
- If the DTC sets within the conditions for running and setting the DTC
  The power steering system is operating as designed
- If the DTC sets outside the conditions for running and setting the DTC
Operate the vehicle within the conditions that the customer experienced.
Verify that the DTC does not set.
- If the DTC sets
  Replace the K43 Power Steering Control Module
- If the DTC does not set
All OK.