FixVault
Home › Chevrolet › 2013 › Spark LS, Automatic Trans › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Radiator Replacement › Removal Procedure

Removal Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  3. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  4. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  5. Disconnect the radiator inlet hose from the radiator. Refer to Radiator Inlet Hose Replacement .
  6. Disconnect the radiator outlet hose from the radiator. Refer to Radiator Outlet Hose Replacement .
  7. Remove the transaxle oil cooler hoses from the oil cooler fittings on the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  8. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
    9. Fig 1: Front Side Air Baffle Retainers
    GM2753094Courtesy of GENERAL MOTORS COMPANY
  9. Remove the 3 right side opening cover retainer (1) and right side opening cover (2).
  10. Remove the 4 left side opening cover retainer (3) and left side opening cover (4).
    11. Fig 2: Upper Air Guard Retainers
    GM2753095Courtesy of GENERAL MOTORS COMPANY
  11. Remove the 4 upper opening cover retainer (1) and upper opening cover (2).
    12. Fig 3: Condenser Upper Pipe Nut
    GM2753098Courtesy of GENERAL MOTORS COMPANY
  12. Remove air conditioning compressor and condenser upper pipe nut (1).
  13. Remove air conditioning compressor and condenser under pipe nut (2).
  14. Remove air conditioning compressor and condenser pipe from the air conditioning condenser.
    15. Fig 4: Radiator Support Bracket Bolts
    GM2753102Courtesy of GENERAL MOTORS COMPANY
  15. Remove the 2 radiator support bracket bolts (1).
  16. Remove the 2 radiator support brackets (2).
  17. Disconnect electrical connectors from the fan shroud.
  18. Remove the radiator and air conditioning condenser and engine coolant fan shroud from the vehicle.
    19. Fig 5: Engine Coolant Fan Shroud
    GM2753100Courtesy of GENERAL MOTORS COMPANY
  19. Unclip engine coolant fan shroud (1) from the radiator (3).
  20. Unclip conditioning condenser (2) from the radiator (3).
  21. Transfer parts as needed.
About FixVault