Installation Procedure
WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ECM retaining nut (3) and tighten to 10 (89 lb in).
- Connect the ECM connector and lock the ECM connector locking lever.
- Install the ECM bracket (1) to the battery tray and tighten the ECM bracket retaining bolt (2) to 10 (89 lb in).
- Install the battery. Refer to Battery Replacement .
CAUTION:
Refer to Fastener Caution .
NOTE:
Connect the front electrical connector to the ECM first.