Radiator Mounting Stud Repair
WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
In this vehicle, mounting pin repair system is only applied to lower side of the radiator, not upper.
NOTE:
If the radiator is leaky, replace it. Refer to Radiator Replacement .
- Pressure test the cooling system. Refer to Cooling System Leak Testing .
- Grind the fracture surface (1) with a proper tool.
- Drill a persistent hole in center of the fracture surface, using a 6 mm (0.24 in) drill.
- Install the new radiator mounting pin (2).
Install the nut (3).
CAUTION:
Refer to Fastener Caution .
NOTE:
Bolt should not be longer than 35 mm (1.38 in).