Circuit/System Verification

WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Verify that DTC C056E is not set.
- If the DTC is set
1. Ignition ON
2. Program the K17 Electronic Brake Control Module.
3. Verify the DTC does not set after driving the vehicle above 40 km/h (25 MPH).
  - If the DTC sets, replace the K17 Electronic Brake Control Module.
  - If the DTC does not set.
4. All OK.
- If the DTC is not set
All OK.