Steering Linkage Outer Tie Rod Replacement

Fig 1: Steering Linkage Outer Tie Rod And Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Steering Linkage Tie Rod Nut CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Steering Linkage Inner Tie Rod Nut Tighten 75 N.m (55 lb ft)
3	Steering Linkage Outer Tie Rod Procedure Use CH-161-B puller to separate the steering linkage outer tie rod from the steering knuckle. Inspect the steering linkage inner tie rod for bent or damaged threads. Clean the tapered surface of the steering knuckle. Lubricate the steering linkage inner tie rod threads with chassis lubricant. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment . Special Tools CH-161-B Puller For equivalent regional tools, refer to Special Tools .