FixVault
Home › Chevrolet › 2013 › Spark LS, Standard Trans › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System And Pedestrian Protection System › Repair Instructions › Rear Parking Assist Alarm Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Rear Bumper Fascia
    GM2327692Courtesy of GENERAL MOTORS COMPANY
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical connector from the rear object sensor.
  3. Rotate the housing counterclockwise and remove the rear object sensor.
About FixVault