FixVault
Home › Chevrolet › 2013 › Traverse LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 277 (Battery, Charging System And Starting System) › Repair Instructions › Battery Negative Cable Disconnection and Connection › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Negative Battery Cable Terminal And Nut
    GM1860912Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the negative battery cable clamp onto the battery negative post (2) and tighten the nut (1) to 9 N.m (80 lb in).
    2. Fig 2: Battery Cover Screw And Cover
    GM1860911Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery cover and tighten the fastener to 1.6 N.m (14 lb in).
  3. Install the rear seat front trim covers.
  4. Reset all of the customers radio station presets.
  5. Install the middle row floor mat, if equipped.
About FixVault