FixVault
Home › Chevrolet › 2013 › Traverse LS, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 3.6L (LLT) - Repair Instructions › Repair Instructions › Ignition Coil Replacement - Bank 1 › Removal Procedure

Removal Procedure

    Fig 1: Ignition Coil Electrical Connectors
    GM1860397Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s) (4).
    3. Fig 2: Ignition Coils And Bolts
    GM860797Courtesy of GENERAL MOTORS COMPANY
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).
About FixVault