FixVault
Home › Chevrolet › 2013 › Traverse LS, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 3.6L (LLT) - Repair Instructions › Repair Instructions › Ignition Coil Replacement - Bank 2 › Removal Procedure

Removal Procedure

    Fig 1: Engine Wiring Harness Electrical Connectors
    GM1858010Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT
  2. Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
    3. Fig 2: Ignition Coils And Bolts
    GM868186Courtesy of GENERAL MOTORS COMPANY
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).
About FixVault