FixVault
Home › Chevrolet › 2013 › Traverse LS, FWD › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Diagnostic Information and Procedures › DTC B2890 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, perform the scan tool Learn Column Soft Stops procedure. Refer to Telescoping Steering Column Calibration 
  2. Operate the vehicle within the Conditions for Running and Setting. Verify DTC B2890 does not reset.
    • If the DTC resets, replace the MSM.
About FixVault