FixVault
Home › Chevrolet › 2013 › Traverse LT, FWD › Repair and Diagnosis › Body & Frame › Mirrors › Mirror System › Diagnostic Information and Procedures › DTC B1722 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the Outside Rearview Mirror-Driver moves when commanding the Mirror Fold with a scan tool.
    • If the Outside Rearview Mirror-Driver does not FOLD 

      Refer to Circuit/System Testing below.

    • If the Outside Rearview Mirror-Driver does FOLD 
  3. Verify the Outside Rearview Mirror-Passenger when commanding the Mirror Fold with a scan tool.
    • If the Outside Rearview Mirror-Passenger does not FOLD 

      Refer to Circuit/System Testing below.

    • If the Outside Rearview Mirror-Passenger does FOLD 
  4. All OK.
About FixVault