Circuit/System Verification

Ignition ON.
Verify that no DTCs are set.
- If any DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no DTCs are set
Verify that the Instrument Cluster ABS indicator turns On and Off when commanding the All Indicators On and Off with a scan tool.
- If the ABS indicator does not turn On and Off
  Replace the P16 Instrument Cluster.
- If the ABS indicator turns On and Off
Verify the ABS indicator turns Off 5 seconds after ignition On.
- If the ABS indicator does not turn Off
  Replace the K17 Electronic Brake Control Module.
- If the ABS indicator turns OFF
All OK.