Rear Side Door Window Regulator Replacement

Fig 1: Rear Side Door Window Regulator

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury. Preliminary Procedure Loosen the rear side door window from the guide nuts. Do not remove the window from the door. Refer to Rear Side Door Window Replacement .
1	Rear Side Door Window Regulator Bolts (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Remove the door trim panel bracket. Remove the water deflector. Do not remove the window guides nuts from the window regulator. After releasing the window from the guides tape the window to the upper door frame before removing the regulator bolts. Disconnect the electrical connector. Tighten 11 N.m (97 lb in)
2	Rear Side Door Window Regulator Procedure Remove the window regulator through the opening in the inner panel. Transfer all parts as necessary. TIP: Inspect the window for proper operation before installing the door trim panel.

Callout

Component Name

WARNING:

Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury.

Preliminary Procedure Loosen the rear side door window from the guide nuts. Do not remove the window from the door. Refer to Rear Side Door Window Replacement .

Rear Side Door Window Regulator Bolts (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Procedure

Remove the door trim panel bracket.
Remove the water deflector.
Do not remove the window guides nuts from the window regulator.
After releasing the window from the guides tape the window to the upper door frame before removing the regulator bolts.
Disconnect the electrical connector.

Tighten
11 N.m (97 lb in)

Rear Side Door Window Regulator

Procedure

Remove the window regulator through the opening in the inner panel.
Transfer all parts as necessary.

TIP: Inspect the window for proper operation before installing the door trim panel.