Generator Control Module Coolant Radiator Hose Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Control Module Coolant Radiator Hose

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Drain the coolant. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling Remove the front bumber fascia. Refer to Front Bumper Fascia Removal and Installation
1	Generator Control Module Coolant Radiator Hose Clamp Procedure Reposition the generator control module coolant radiator hose clamp using BO-38185 Hose Clamp Pliers Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools, Refer to Special Tools
2	Generator Control Module Coolant Radiator Hose Quick Connect
3	Generator Control Module Coolant Radiator Hose TIP: Replace corroded hose clamps and brackets.