FixVault

Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver side inflatable restraint lower module. Refer to Inflatable Restraint Instrument Panel Lower Module Replacement - Driver Side .
  2. Disconnect the electronic brake control position sensor electrical connector.
  3. Fig 1: Electronic Brake Control Position Sensor Bolts
    GM2384635Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 electronic brake control position sensor bolts (1).
  5. Fig 2: Electronic Brake Control Position Sensor
    GM2384640Courtesy of GENERAL MOTORS CORP.
  6. Remove the electronic brake control position sensor (1).