Circuit/System Verification

Vehicle ON. Operate the hood release to open the hood. The engine should start and run.
Verify the engine starts and runs.
- If the engine fails to start
  Diagnose the engine system. Refer to Engine Cranks But Does Not Run .
- If the engine starts
Verify DTC P0AB9 is not set.
- If the DTC is set
1. Program the T6 Power Inverter Module.
2. Verify the DTC does not set.
  - If the DTC sets, replace the T6 Power Inverter Module.
  - If the DTC does not set.
3. All OK
- If the DTC is not set
All OK