FixVault
Home › Chevrolet › 2013 › Volt › Repair and Diagnosis › Hybrid/Electric Powertrain › Electric Converters and Controllers › Hybrid/EV Control System › Diagnostic Information and Procedures › DTC P15F2 › Circuit/System Verification

Circuit/System Verification

NOTE:

Diagnose and repair any communication DTCs prior to performing this testing.

  1. Vehicle ON.
  2. Verify DTC P15F2 is not set.
    • If the DTC is set 
    1. Program the K20 ECM.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the K20 ECM.
      • If the DTC does not set.
    3. All OK
    • If the DTC is not set 
  3. All OK
About FixVault