FixVault
Home › Chevrolet › 2013 › Volt › Repair and Diagnosis › Hybrid/Electric Powertrain › Electric Converters and Controllers › Hybrid/EV Control System › Diagnostic Information and Procedures › DTC P1AEC-P1AEF › Circuit/System Verification

Circuit/System Verification

  1. Vehicle ON.
  2. Verify DTC P0ABB, P0ABC, or P0ABD is not set.
    • If none of the DTCs are set 
  3. Verify DTC P1AEC, P1AED, P1AEE, or P1AEF is not set.
    • If any of the DTCs are set 
    1. Program the T6 Power Inverter Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the T6 Power Inverter Module.
      • If the DTC does not set.
    3. All OK
    • If none of the DTCs are set 
  4. All OK
About FixVault