FixVault
Home › Chevrolet › 2014 › Camaro Z/28 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 6.2L, Or 7.0L - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement (LSA)

Throttle Body Assembly Replacement (LSA)

Fig 1: Identifying Throttle Body Assembly (LSA)
GM2164137Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
CAUTION:

Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.

Preliminary Procedures

  1. Remove the air cleaner resonator and outlet duct. Refer to Air Cleaner Resonator and Outlet Duct Replacement .
  2. An 8-digit part identification number is stamped on the throttle body casting. Refer to this number if servicing, or if a part replacement is required.
1 Throttle Body Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


TIP:  In order to prevent possible contamination, cover or plug any opening when servicing the throttle body.
Tighten 
10 N.m (89 lb in)
2 Throttle Body

Procedure

  1. Disconnect the throttle body harness connector.
  2. Perform the throttle learn procedure. Refer to Throttle/Idle Learn .
About FixVault