FixVault
Home › Chevrolet › 2014 › Express 1500 LS, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Flow Control Valve Replacement - Off Vehicle › Assembly Procedure

Assembly Procedure

    Fig 1: View Of Power Steering Pump Control Valve Assembly
    GM580317Courtesy of GENERAL MOTORS COMPANY
  1. Ensure the flow control spring (5) does not fall out of the pump housing (1).
  2. Lubricate the NEW O-ring seal (3) with power steering fluid.
  3. Install the O-ring seal onto the connector and fitting assembly (2).
  4. Install the control valve assembly (4).
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the connector and fitting assembly (2) and tighten to 62 N.m (46 lb ft).
About FixVault