FixVault

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B12A4 39 is not set.
    • If DTC B12A4 39 is set 

      Replace the P17 Info Display Module.

    • If DTC B12A4 39 is not set 
  3. Verify DTC B12A4 45 is not set.
    • If DTC B12A4 45 is set 
    1. Program the P17 Info Display Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the P17 Info Display Module.
      • If the DTC does not set
    3. All OK
    • If DTC B12A4 45 is not set 
  4. All OK.